P-GA FUEL DISPENSER

P-GA FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type: Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 280kg

Dimension(L×W×H): 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

l type fuel dispenser. Article I Failure judgment and troubleshooting Normal operation without fuel 1.1 If motor turn reversely, power phase would be wrong; if delivery V belt loose and rupture, regulating expansion wheel or replacing V wheel. 1.2 Vapor separator failure If triangular gasket of inlet and filter washer is loose or broken, air would flow into hydr fuel dispenser aulic system. To solve this kind of leakage is to tighten bolt or change a new washer. Serious jam in filter, including cone-shaped net, should clean waster or change a new filter net. If the check valve of vapor separator is clamped, resulting in no delivery, disconnect check valve and clean it, finally reassemble. Incorrect installation of floater or waster under sealed gasket in vapor separator, oil would be discharged from exhausting pipe. To clean waster and reassemble, change a new floater when find serious damage or not being homocentric. If small floater is leak or fall down, high pressure chamber can reach high pressure so that no delivery in fuel dispenser. Broken upper cover gasket also result in the communication between two chambers of high pressure and vapor separator so that no discharge out of fuel dispenser. 1.3. Pump trouble fuel dispenser Substance clamped between valve core and valve seat in overflow valve result in oil circulate within pump. Taking out valve core and clean feculence, fix falling valve seat, changing pump when necessary. Due to high speed rotation some vane abrasion or damaged the inner pressure of pump is reduced largely, even lost suction capacity. Replacing damaged vane after cleaning feculence. Broken gasket or reverse installation in the surface between pump and vapor separator result in the communication of high and low pressure chambers so that no oil is discharged. Rotor and stator are loose, making pump axis run without loan. It is need to replace rotor or pump. Long operation increases the clearance between inner and outer gear, resulting large interior leakage and suction capacity declining fuel dispenser

tified by 2 bytes:　　 - Subnet = device type　　 - Node = 1 to 127　　 4 bin8 R( ) M　　 Heartbeat_Interval　　 (04H) (0-255) W( )　　 Time fuel dispenser in seconds to give a heartbeat message on the　　 network.　　 0 = no heartbeat generated　　 Please reference the respective IFSF Application Protocol　　 description for details of the default Heartbeat_Interval to　　 be used when device has been reset or the current　　 Heartbeat_Interval value has been corrupted.　　June 2005 IFSF - STANDARD FORECOURT PROTOCOL FP2_1.89　　 COMMUNICATION SPECIFICATION　　 Page: 29　　 5 bin8 R( ) M　　 Max_Block_Length　〠fuel dispenser € (05H) (32-228) W( )　　 The range for the block length is 32 to 228 byte. Messages　　 that are longer are split into appropriate sized blocks.　　 Please note that to achieve complete interoperability　　 between IFSF devices utilising the LonWorks and standard　　 LonWorks devices the Max_Block_Length must be set to　　 32 bytes.　　 The default value (i.e. the value after a reset of the device)　　 of the Max_Block_Length is 32 bytes.　　 COMMANDS　　 11 bin8 bin fuel dispenser

Output, demand and jobs Sound and fury Prices and wages Spain Huddled against the masses fuel dispenser Total tax revenues as % of GDP Belgium Right on Money and interest rates Sweden The Economist commodity price index Electric power Stockmarkets Charlemagne The brain fuel dispenser business Trade, exchange rates and budgets General-government structural budget balance Britain Emerging-Market Indicators National Health Service Handing over control Overview fuel dispenser